A dead blow hammer is a useful tool as it prevents damage to soft surfaces while reducing the amount of strike rebound by absorbing tremors and improving the striking force of the hammer.
Dead blow hammer has a smooth face and sand-packed head to deliver a controlled impact with minimal vibration and rebound. The soft textured grip of a dead blow hammer makes it easier to hold and swing.
A dead blow hammer delivers strong blows with minimal rebound. The head of a dead blow mallet is hollow and filled with sand or shot.
The force produced by each strike is spread over a greater amount of time, thus reducing rebound while reducing impact to the target surface.
These hammers are primarily used by workers in the car repair trade. They are often used for tapping out vehicle body dents, working on a chassis, and also for working on hub caps.
They are primarily used where some concentrated force is required. Some people use them to put stakes into the sand, and even for quickly putting in tent pegs.
There are many various types and sizes of dead blow hammers available in the market. Below are essential factors you should look into before deciding which hammer to buy.
Focusing on these factors will help you choose the best hammer for your need:
The handle of your hammer is of utmost importance. It should be comfortable to use and not slip out of hands while working.
The hammer you buy should be durable, so that lasts for a couple of years with ease. You should check the build quality when picking the right dead blow hammer.
Your hammer size depends on your work. There are different hammers available for various tasks, and you need to know the right tool for your specific needs.
This is one of the crucial factors you must look into since it involves your affordability.
Expensive brands do not always promise quality. There are many other features you can get for the same price.
Top 15 Dead Blow Hammers ReviewsBelow are the top 15 dead blow hammers that are doing well in the market currently. You can opt for the one that best suits your needs.
The Neiko dead blow hammer has a steel shot filled head, which adds extra force to hammer blows and eliminates rebound & spark. It delivers solid force that does not damage wood or soft metals like steel hammers.
It is constructed to naturally absorb shock to lessen blow-rebound for more control and safety.
It is ideal for auto bodywork. Its unicast poly molded body prevents the hammer from wearing away between the head and handle, and material prevents sparks upon impact.
Its diamond textured non-slip handle grip comfortably keeps hammer in hands after impact. It weighs 3.25 pounds. No batteries required.
- One-piece construction
- High visibility neon orange
- Non- slip handle
- Limited impacts
- Short body length
This set includes a 12-oz. Brass hammer, a 16-oz. ball-peen hammer, and a 24-oz. Dead blow hammer. The 12-ounce brass platted cap hammer can be used for non-sparking applications.
The 16-ounce hammer’s steel face and peen allow conventional use in striking punches and chisels as well as shaping and straightening unhardened metals.
The 24-ounce urethane-coated hammer is used for non-marring or non-sparking applications. The reinforced steel handle comes with an anti-shock grip.
The non-sparking, chemical resistant molded urethane covering is bright orange for high visibility and safety.
This set weighs 3.2 pounds.
The dimensions are 15.2 x 8.8 x 1.8 inches
- No marks
- No surface damage
- High visibility for safety
- Small size
The set includes 1 of 16 oz. (1 pound) dead blow hammer; 1 of 32 oz. (2 pound) dead blow hammer; 1 of 48 oz. (3 pound) dead blow hammer.
Steel shot filled hammerhead eliminates post-strike rebound and transfers full energy into work.
High impact rubber exterior jacket delivers non-marring and anti-sparking striking, and protects work surfaces from damage and deforming.
All metal interior construction provides durability and withstands daily solid striking to ensure longevity.
Diamond textured non-slip handle gives comfortable user operation, and hi-visibility neon red color makes it easy to store and locate.
This set weighs 6.9 pounds, and the dimensions are 14.9 x 5.2 x 4.9 inches. The material used in making this set is poly and steel. No batteries are required.
- Comfortable to use
- Affordable quality
- High Visibility Neon color
- Heavy-duty interior core
This is a multi-use hammer specially designed for woodworking, metalwork, and more. It is threaded faces that are easy to change and stay securely on the aluminum head.
It includes hard-to-find copper and brass for metalwork without sparks. Rubber, nylon, and ABS provide varying hardness for non-marring blows and less recoil.
Rather than having five hammers, which is an unnecessary clutter, you can have only one with five different interchangeable faces.
The five interchangeable heads are:
-1-22 mm copper
-1-22 mm brass
-1-22 mm nylon
-1-22 mm plastic
-1-22 mm rubber
It weighs 3.2 ounces. This hammer is made up of plastic. A metric measurement system is used. No batteries are included. Its dimensions are 14.3 x 11.7 x 23.4 inches
- Reduces clutter at workspace
- Easy head change
- Produces no sparks
- Difficult to handle
- Limited to professional applications
- Higher acquisition costs
This hammer is fitted as standard with one White and one Soft Grey screw in the face.
It is used as a multi-purpose striking tool in most assembly applications, including engineering, furniture making, shopfitting, partitioning, double glazing, and injection molding operations.
Alternative color-coded faces to distinguish hardness are also available.
The diameter of this hammer is 38mm (1 1/2 in). It weighs 1.25 pounds. The dimensions are 4.3 x 11.1 x 1.5 inches. This hammer comes in multi-colors. No batteries required.
This hammer has a Chrome-plated Zinc Head. This plating ensures some longevity as it lowers the levels of corrosion and other forms of deterioration.
Hence, this shows the durability of this hammer.
- Wooden handle
- Highly resistant to sweating
- Allows convenient handling
- Less durable
- Plastic handles can break
The ABN Dead Blow Hammer, 4 lb Pound – Unicast Mallet with Non-Marring Rubber Coating, minimizes damage on any hammered surface.
It is versatile and can be used for various purposes, for example, construction or on metal surfaces.
One wants to prevent marring and sparking. These two benefits are made possible by the rubber coating and the unicast body.
It has a comfortable grip as it is rubber coated and has a serrated gripping handle.
This unicast, rubber-coated hammer delivers high-force hits within minimal recoil for a non-marred effect.
This hammer weighs 4 pounds. It is made up of metal, and no batteries are required.
- Produces no sparks
- Comfortable grip
- Leaves surfaces intact
- Performs fewer applications
Estwing’s dead blow hammers have power from within through the movement of hundreds of steel shot for maximum power and control.
Steel canister, with steel shot and steel handle, is completely encased in polyurethane, which is oil and chemical tolerant.
This hammer eliminates or minimizes denting and marring. It reduces swing fatigue, sting, and vibration.
It weighs 0. 32 ounces. Its dimensions are 15 x 5 x 3 inches. Its measuring system is Metric. No batteries are required.
The dead blow technology holds and dampens the vibrations. At the same time, it increases power output from the hammer.
This hammer can be used for woodwork, automotive repairs, and sheet metal forming, etc.
- Tolerant of chemicals and oils
- Eliminates mars and dents
- Reduces swing vibrations
- Risks of dust and flying particles
The steel shot-filled head adds extra force to hammer blows and eliminates rebound; it helps minimize damage to the struck surface since it controls the striking force with minimal rebound from the striking surface.
This is suitable for dislodging small parts, installing or removing knock-off hubs, and for popping out small dents.
The Hi-visibility red color makes a hammer easy to locate. The textured handle is ideal for a non-slip grip.
The set includes 1 lb. Dead Blow Hammer, 2 Lbs Dead Blow Hammer and 3 Lbs Dead Blow Hammer.
The overall length is 12-inch, 14-inch, 14-inch. This set weighs 6.95 pounds. Its dimensions are 14.2 x 5.1 x 2.6 inches. No batteries required.
- Yields no sparks
- Non-slip grips
- Potentially injurious
- Not so reliable
This hammer is excellent for use on metal, leather, woodwork, jewelry, cars, machinery, and more. It has a non-sparking head, which means there is no danger of sparking, which can cause an explosion.
It has a solid brass head; hence, it will not mar harder metals or mark softer materials. It has a solid 1 piece neon orange easy-grip handle to give a solid feel and stop slippage during use.
The PVC coating formula prevents splitting and chipping for long-lasting use, and the dual head brass tip of the hammer makes it suitable for constant usage.
Bright neon orange color makes it easy to spot in the tool kit or to locate at the worksite.
This hammer weighs 1.45 pounds. Its dimensions are 13 x 4.1 x 1.4 inches. No batteries are required.
- Dual head brass tip
- Easy Grip Handle
- Brass end can mar surfaces
The steel shot inside the head eliminates rebound, conserving the energy of each blow. The high-impact poly jacket surrounds steel handle and head, preventing marring of surfaces.
This hammer has a diamond textured handle for a non-slip grip.
Specifications: Weight: 32 oz. (2 lb.); Handle Length: 11-1/2 in. This hammer is made with lead-free and 3P phthalate-free materials.
Its dimensions are 13.8 x 4 x 2 inches. No batteries are required.
- Minimizes fatigue
- Easy to handle than most other kinds of hammers
- Generates fewer impacts
- Time-consuming to apply
This three-piece hammer set includes 1/2 Lb., 1 Lb. and 2 Lb. Hammers. They have soft rubber handles for a non-slip grip. They have steel shot filled for more force.
They are made up of non-spark material. This hammer is tough enough to withstand the most massive impacts.
It is also able to handle multiple chores with maximum efficiency. This hammer weighs 4.75 pounds.
The product dimensions are 14.2 x 3.9 x 4.7 inches. No batteries required.
- Eliminates rebounds
- Highly versatile
- Assemble before use
It is an optimal machinist hammer that combines the effortless positive strike of a dead blow hammer with hardened steel domes for shaping and forging metal.
Its steel face is used for striking, shaping, flattening, and expanding metal.
Its shot-filled dead blow action reduces rebound while providing maximum striking force.
Its extra-long textured non-slip handle gives extra leverage when needed. It has a durable premium polyurethane construction.
It has a textured non-slip handle. This hammer weighs 3.45 pounds. Its dimensions are 17 x 5 x 2 inches. No batteries required.
- Does not mar objects
- Better grip
- Lighter weight
- Easily breaks
This hammer has a durable premium polyurethane construction. It has diamond textured non-slip handle neon orange. Its length is 12-3/4″.
Its steel face is used for striking, shaping, flattening, and expanding metal. It has a nice and unique design, and it works great for craft work like jewelry making or DIY projects.
The head weight: 32oz and the hammer Weight: 2.75Lbs. Its dimensions are 14.1 x 2.2 x 1 inches. No batteries are required.
- Small shape
- Cut resistant technology
The ten hardened steel punches and the nylon punch are clearly labeled and ringed with rubber for added grip to dampen vibration.
The reimagined hammer has a fantastic grip and balanced weight to give both precise control for tapping tiny pins and optimal power for tough pins.
The driving faces of the hammer can easily be switched between steel, brass, rubber, and nylon – whichever is best for the job at hand.
We can use the pin alignment tool to hold the smallest pins precisely over their holes to easily drive them in.
The rugged kickstand tool case keeps all parts of the kit organized and easily accessible. This hammer weighs 1.68 pounds.
The kickstand tool case displays all of your tools right in front of you, making it easy to grab what you need when you need it. It can also:
- Grab ahold of small pins and avoid hitting your fingers with the pin alignment tool.
- Easily change out hammerheads to adjust to the situation.
- Keep your gear organized and easily accessible with the kickstand case.
- Grip onto the hammer, and the pin punches well with added grip.
Its dimensions are 9.2 x 4.5 x 1.2 inches, and it weighs 1.68 pounds
- Four interchangeable heads
- Comes with organizer
- No roll pin punches
The head holds a vibration dampening shot for increase power & control. This hammer is extremely durable for the toughest jobs.
It can be used for automotive work, woodworking, sheet metal forming, and other precision work.
It is oil and chemical resistant and has a comfortable, durable grip for a stronghold in all conditions.
Dimensions 14.4 x 2.2 x 4.6 inches.
- Dampens shocks and vibrations
- Yields durable outcomes
- Comfortable grips
- More weight
- Impedes ability to move
Frequently Asked Questions
What are dead blow hammers used for?
These hammers are used for screwing nails on surfaces of materials. Unlike your ordinary hammer, these dead blow hammers are sturdy and more effective.
When to use a dead blow hammer?
In the maintenance of hydraulic machinery and aerospace work, dead blow hammers are useful in freeing stuck cylinders without damaging the surface or objects.
Dead blow hammers are used in woodworking to knock joints together or apart without denting the wood pieces being worked on.
What is a dead blow sledgehammer?
A dead blow sledgehammer is a specialized mallet helpful in minimizing damage to the struck surface and in limiting peak striking force, with minimal elastic rebound pressure from the struck surface.
What are the characteristics of a dead blow hammer?
A good hammer has to be able to produce great force, be light enough to carry with ease, and yield numerous operational cycles.
What does a dead blow hammer weight?
A dead blow hammer comes in different weights and sizes. The weight and size depend on the usage of the hammer.
Are heavier hammers better?
A heavier hammer isn’t necessarily a better one, at least as far as framing hammers are concerned.
Many hammers today are built from lightweight titanium with a steel face, which saves weight, and a carpenter can swing a lighter hammer faster and more often throughout a long day’s work.
Now you have the insight you needed about dead blow hammers. Skim the list above and determine the one which mirrors your unique expectations.
Also, remember the key factors in the buyers’ guide to make your purchasing decision easier. We wish you all the best in your subsequent search.