15 Best Respirators For Woodworking Reviews 2019 | Most Effective List

Best Respirators For Woodworking

Working with wood certainly poses threats such as physical harm from tools and equipment. However, a hazard that is often overlooked is air pollution.

Woodworking leaves debris and hazardous particles in the air that could harm your health. Therefore, it’s imperative to buy quality equipment that can protect you from this.

So let me assist you in your quest and guide you through the best respirators for woodworking.

Buyer’s Guide

Before you proceed to make a purchase, you always consider a few factors on the scale of which you measure the odds of buying a certain product.

How good it would have been if somebody laid out the list of things you should consider before you set out to your hefty job of actually buying the product you desire.

Oh wait, I got you covered! Look below to make sure you define your priorities based on the following factors.

  • Purpose

First and foremost comes the reason why you want to use your respiratory mask.

What kind of wood are you dealing with? Will you be cutting only, or will you have to saw as well? Is the woodwork less toxic or more?

There are different types of respiratory masks available in the market based on all these functions. So make sure you purchase something that goes by your needs.

  • Filter

You need to choose the filter of your mask according to the nature of your work.

If the wood you are working with is more toxic, you would need more than one filters in your mask.

If you are working with wood that does not release too toxic of dust, then one filter will do.

  • Size

You can buy either a full face or half face mask. A full face mask will protect your entire face from the dust.

This will be used if the dust is not just dangerous if breathed in, but also quite harmful for skin and eyes.

A half face mask can be used for less toxic conditions.

  • How Long Do You Need To Wear The Mask

The disposable masks have expiry dates. You have to take a look at the number of hours you need to work with your wood.

If you are only up for a small DIY project, then you can go by with almost anything.

But if you are a worker who needs to be in the company of saw dust day and night, then you would probably have to go with something that could go for long hours without expiring.

  • Amount of Protection

Amount of protection is something that cannot be compromised.

What will be the point of spending money on and wearing a respiratory face mask when it offers protection that is almost equal to not being protected at all?

The quality of your mask must be as good as the risk of your job.

If you are working with more toxic wood, you will need the extremely high-quality masks (refer to the guide below to get an idea of what masks to get).

Top 15 Respirators For Woodworking Reviews

Now that you have a general idea of what to look for in a face mask, I will now move on to introducing you with the most effective, and the very best quality respiratory masks in the market.

By viewing this list, you will save yourself the bother of individually researching every product. The pros and cons are also mentioned in the end to break it down even further for you.

So kick back and relax as I unfold the best respirators for woodworking in the market!

1. 3M 6503QL Reusable Respirator

The reason why this product was placed at the top of the product list is that I fell in love with its looks. So sleek!

Now you can stay protected AND enjoy the fact that you are looking irresistible at the same time.

Let’s get to the point. The facepiece offers a combination of durability, strength, and stability, also combined with light textured silicone face seal.

When fitted with the correct filters, it provides protection that is up to 10 times the PEL! (the permissible exposure limit, if you may).

Pros

  • Easy on and off
  • Highly comfortable
  • Low profile
  • No fogging
  • Compatible

Cons

  • Not for personal use, only industries
  • Stiff plastic

2. GVS SPR457 Half Mask Respirator

The strong filtration and an awesome field of vision are what this mask has to offer.

Not just that, you will also be able to enjoy the features of organic vapor filters, that offer a wide range of applications.

The eyewear is also designed to not fog so that you will have a convenient time with this piece!

Pros

  • Compact
  • Lightweight
  • Flexible
  • Reduced breathing resistance
  • Strap easily adjustable

Cons

  • Not easy on the nose
  • Flappy sound while exhaling
  • Gets warm

3. TREND Faceshield Dust Protector

Get ready to hear about a classy piece, but the price of which is by the quality! Don’t even get me started on the twin fine dust filters.

Best part? Now your entire face will stay protected and pretty, not just your nose. Also offers low battery warning, reduced noise and vibration botheration, and extended vision.

If you are one of the blessed (when it comes to money), this is the piece you must get.

Pros

  • Built-in fan
  • Twin dust filters
  • Audible battery warning
  • Reduced noise

Cons

  • Low battery life
  • Too expensive for the quality
  • Too heavy

4. Complete Suit Trudsafe 6800 Respirator

Let me let you in on the sweetest feature of this incredible piece. You can use it both as a full face, or even a half face mask. Isn’t that amazing?

It can prove to be very convenient, depending upon your mood, the type of work, and the weather. The two available connectors are both universal and standard.

The face seal is silicone, allowing for maximum comfort. Material? Don’t even worry about that.

Pros

  • Two connection types
  • Decent filters
  • Wide range of applications
  • Good tightness

Cons

  • Expensive
  • Heavy
  • Cannot be used with glasses 

5. Miller Electric Half Mask Respirator

A half mask respirator, pretty reasonable for its price. Consists of a single filter. The head harness material is a thermoplastic elastomer.

It’s quite an economical respirator however, it’s functionality is also quite limited due to low price.

Pros

  • Comfortable
  • Safety glasses work well

Cons

  • Doesn’t work well with fumes
  • Doesn’t fit under a welding hood

6. YinsHome Respirator Mask

The straps are high density that ensures an airtight seal, so you won’t be complaining about any kind of fumes at all.

Premium quality silicone ensures the best quality material. Soft pads a detachable, so that is a plus.

The valve is durable and breathing, and dual cartridge system will give you the best experience ever!

Pros

  • Good quality
  • Dual protection
  • Strong filtration
  • Fits the face
  • Range of applications

Cons

  • Clips of straps break after a while
  • Comes in one size

7. Safety Works 817664 Toxic Dust Respirator

One warning before you buy the project; this respirator is likely to expose you to chemicals that are harmful to you. They might cause cancer or congenital disabilities.

Apart from that, this piece offers a flexible fit on the face, and the lightweight cartridges offer an unobstructed vision.

Pros

  • Flexible facepiece
  • Low profile
  • Lightweight
  • Adjustable headbands

Cons

  • Doesn’t work with serious toxins
  • Filters do not stay attached
  • Not comfortable

8. IVSUN Vapor Full Face Respirator

The greatest thing about this is the number of toxins it offers protection from, like aniline, benzene, nitrobenzene, carbon tetrachloride, chlorine, chloropicrin, alcohol, acetone, carbon trichloride, carbon disulfide, nitroalkane, and bromomethane.

But here are a few precautionary measures that you have to take. First of all, you have to rinse with clean water and do not use any other detergent as it may damage the piece.

Then, make sure the valves are sealed tightly. Change the filter regularly according to use.

Pros

  • Assured quality
  • Anti-fog
  • External anti-friction
  • Wide vision
  • Easy to breathe
  • Widely applicable

Cons

  • Really Expensive

9. Safety Works 817662 Respirator

This product shows 99% efficiency against the contaminants that are oil based. Works for at least 8-hour shifts, which is very reasonable for its price range.

The multiflex design it has to offer makes the respirator more adaptable to your face than the standard half masks.

The carbon cartridges are a low profile that is extremely comfortable for the sake of long term wearing.

Pros

  • Flexible, for a better seal
  • Low profile cartridges
  • Unobstructed view
  • Long life cartridges
  • Size is standard

Cons

  • Doesn’t fit every face type
  • Not enough air

10. Safety Works SWX00320 Respirator

This multi-purpose respirator is going to offer you the comfort of superior fitting and protection. As the respirator is multi-purpose, it will trap over 99 percent of the toxins.

Moreover, it is approved by the respirator standards of the government. Protects from pesticides, ammonia, lead fumes, toxic dust, paint fumes (except urethane fumes), and most importantly, from asbestos.

Pros

  • Superior seal
  • Low profile cartridges
  • Ideal for working with a range of toxins

Cons

  • Too heavy
  • Plastic isn’t soft enough

11. Muhubaih 15 in one Full Face Dust Mask

The name says it; 15 whole parts offered in one single package! It’s a steal.

It can be used for a wide range of applications; wider than any product that has been mentioned so far. The lens in it is large for a bigger view.

The material used is silicone and thermoplastic and elastomer material. The full face design is always a plus, including here.

Pros

  • Full facepiece
  • Lightweight
  • Superior material
  • Bayonet connection type

Cons

  • Bulky in Nature
  • Expensive

12. 3M Personal Protective Equipment

Half facepiece, as well as reusable. Also, suitable for many functions, but not all. The respiratory ease, when combined with particular filters, offer the best experience.

However, you shouldn’t use them in an environment that imposes an immediate danger to life. Can be used for a wide range of applications.

Pros

  • Comfortable and convenient
  • Lightweight
  • Can be dissembled
  • Replaceable cartridges

Cons

  • Causes pain in the nose
  • Too small

13. 3M(TM) Half Facepiece Respirator

The half face design combines comfort with convenience and presents it in front of you. You will see the difference between this and other masks in terms of softness.

The filters are removable, and can be replaced by NIOSH approved 3M filters and cartridges.

Pros

  • Ease of use
  • Versatile
  • Lightweight

Cons

  • Sealed poorly
  • No filters

14. MoHo Dust Mask

It looks pretty simple, but don’t let the looks deceive you here. This mask will offer you protection from 95 percent of the dust particles out there.

It is not for construction purposes, though. Only to be used in normal, day to day settings. But it works efficiently in those settings as well.

Pros

  • Pretty design
  • Premium nylon
  • Size is adjustable

Cons

  • Not available in many colors
  • Longevity is unreliable

15. Fightech Dust Mask

Last but not least, I would like to mention this mask. It is moderate, simple, and pretty.

Not to mention, it also offers great protection from the dust, all while making you stay good looking.

Breath healthy and look good with the Flightech dust mask.

Pros

  • Earloop design
  • Universal use
  • Comfortable to use

Cons

  • Hot
  • Doesn’t filter very effectively

Frequently Asked Questions

Can respirator go bad?

Yes, the components of a respirator can degrade over time. The longer the respirator has been the use, the more likely it is to not perform at its full potential.

With time, components of the respirator such as the nose strap and the foam may degrade, which will affect the overall quality of the product.

The expiration dates vary from product to product and are usually written on it.

Can a respirator filter Carbon Monoxide?

There are some types of respirators that filter carbon monoxide. They are only to be used for escape, not for working.

The air supply respirators are recommended for the areas where carbon monoxide is abundant. The fibrous mesh of the respirator contains a source of ultraviolet light that photo excites the titanium dioxide.

The air that contains carbon monoxide is passed through the chamber, and carbon monoxide oxidizes to carbon dioxide, that reaches you.

Are respirator masks reusable?

Yes, the disposable ones are reusable. However, they need to be replaced as soon as they get moist, typically after 8 hours.

You need to change them regularly, though, if you want them to stay effective. They are either half face or full face.

The reusable ones come with the feature of air purifying, and you can fit different filters in them depending upon the level of protection that you need.

Will a dust mask stop asbestos?

A dust mask is great at stopping traditional dust, which is what its job is supposed to be. However, it is not sufficient to stop the asbestos particles.

To be able to perform that function, it should have a high-efficiency particulate absorber (HEPA). This is a filter that is specifically designed specifically for use with asbestos.

Should I wear a mask when cutting MDF?

People who use MDF are required to use standard protection. This protection includes wearing dust masks and carrying out the cutting process in a fairly ventilated place.

If you use an average dust mask, it will prove to be ineffective and will be unable to filter the really fine particles.

When you take the mask off, your clothes will be full of dust.

Is drywall dust bad?

Drywall dust may not have immediate side effects. However, if the respiratory system is exposed to it for a longer period, risk of persistent irritation of airway and throat is increased.

Phlegm production, coughing, and breathing difficulties that are similar to asthma are also encountered.

The people who smoke or people with sinus infections are exposed to even a higher health danger.

Can I vacuum asbestos dust?

Do not, at any cost, vacuum, sweep or dust the debris that may contain even traces of asbestos. By doing so, you will be increasing the chances of the asbestos particles releasing into the air and going into the nasal cavity.

The dust must be removed by wet mopping from the ground, and dabbing your clothes with a wet cloth.

And also from the special HEPA vacuum cleaner used by the trained asbestos contractors.

How much exposure to asbestos is dangerous?

Not even a slight amount of asbestos can be considered safe.

Products that consist of even 1 percent of asbestos minerals are considered dangerous and asbestos-containing.

You are more likely to get an asbestos disease if you are exposed to more asbestos. Lung cancer and asbestosis are dose-related diseases.

How dangerous is MDF dust?

Considering the present legislation, hardwood dust, softwood dust, and formaldehyde are dangerous for your health.

Both kinds of woods are known to trigger your respiratory system and make it sensitive. They can cause asthma and many other breathing problems as well.

The hardwood dust is also capable of causing a rare kind of nasal cancer.

Is MDF wood biodegradable?

There has been invented a new kind of biodegradable and also recyclable kind of wood, that is more commonly known as medium density fibreboard (MDF).

This kind of fibreboard is likely to dramatically reduce the issue of future waste. However, as MDF is not capable of being recycled, the MDF that goes to waste either needs to be incinerated or goes to landfill.

Does all MDF have Formaldehyde?

Yes, all MDF has formaldehyde. If your machine or sand MDF, a mixture of softwood dust and hardwood dust will be formed.

In addition to that, traces of formaldehyde will also be found. MDF that is made with UF may emit the formaldehyde gas for years after it is manufactured.

Is plywood dust dangerous?

Any kind of dust from any kind of wood is considered harmful for the respiratory system. It has toxic effects and irritates the nose, throat, and eyes. It will also cause dermatitis.

The respiratory system effects include allergic reactions and decreased lung capacity. It is not just harmful to health, but it also poses safety hazards, as it can cause fire or an explosion.

Is MDF banned in the United States?

Even though MDF poses many health and safety risks, it is used in the US. The old MDF that released a great deal of formaldehyde is actively discouraged nowadays.

However, the US still uses the low emission formula of MDF.

Conclusion

So, there you have it. A complete guide to your respiratory masks, where the features of every product have been mentioned, along with the buyer’s guide and the pros and cons.

May this article serve as a help and a way of purchasing the best product for you.

5.0
01
Written By
More from Paul Jackson

15 Best Rivet Guns 2019 | Quick Seekers Reviews

Rivet guns come in all shapes and sizes; they are applicable in...
Read More

Leave a Reply

Your email address will not be published. Required fields are marked *